"Fan Xpert" is a function that automatically controls the rotation speed of the CPU and case fans.When the temperature rises, the rotation speed automatically increases, and when the load drops and the temperature drops, the fan noise becomes quieter.Rotation speed and reaction speed to temperature can be set in detail for each fan, but you can also set it automatically with one click. If you use "Auto Tuning", overclocking work will be performed automatically with the click of a button, so even general users who are not familiar with PC can overclock.The image on the right is a screen after tuning that shows how much performance has improved.
With the "TurboV EVO" function, you can tune by changing the operating frequency and magnification of the CPU, and the operating frequency and voltage of the built-in GPU. You can enable AWAY mode, set times to turn off the display and put the computer to sleep, set fan speed modes, mute the volume, and more. "EPU (Energy Processing Unit)" is a function that optimizes the power consumption of the entire system, and automatically adjusts power consumption according to the system load to save power. Update motherboard drivers, BIOS and softwareĭisplays hardware information for motherboard, CPU, and memory Manual or automatic control of fan speed according to temperatureĭetect and remove junk files in your system Overclock your CPU and GPU manually or automatically Power saving function that automatically changes the power plan according to the system load DIGI+VRMĪdjust the balance between system stability and overclocking With AI Suite, you can mainly use the following functions. They will return to 0% if the temperature is 65 C or less.AI Suite is not compatible with all ASUS motherboards, so you may not be able to install it on some products.Available functions may vary depending on the product model and chips installed. For example, in my curves, the fans will always spin at 100% speed if the temperature is 95 C.
When the minimum or maximum temperature is reached for both of these cards, their corresponding speed will trigger. Next, you need to set a minimum speed and a maximum speed. Basically, you're telling the app, "I want my temperature to never exceed X, but it's okay if it never goes below Y." Both cards require you to set a minimum and a maximum temperature. First, let's focus on the Target and Linear cards since they're very similar to each other. I've already configured these cards to my personal preference. For case fans, you can use the hottest motherboard, CPU, or GPU sensor as it doesn't matter too much. Before you do anything, you need to select a temperature source.įor CPU fans, use one of your CPUrelated sensors (pick the one with the highest temperature to be safe).
0 kommentar(er)
